HOME > Products > Heating Elements > How to Moldatherm heater

How to Moldatherm heater

The unit heaters for electrical heating and resistance heating are
easy to assemble and can be custom-ordered.

The unit heaters made by us, Moldatherm series heaters in the forms of standardized cuboid (plain type), half cylindrical (half cylinder type) or 1/4 cylindrical (quarter cylinder type) are easy to assemble and easy to replace for maintenance. Custom-made types are also available. Consult us about the size, usage, temperature settings and others. For the custom-made types that are not included in the attached specifications table, feel free to contact us.

Block construction method makes assembling and maintenance so easy !

The furnace can be easily assembled by sequentially taking steps 1 to 3 shown on the right. Maintenance is easy, too.

More energy saving and higher efficiency for
electrical heating furnaces and resistance heating furnaces

The advantages of the Moldatherm heater series unit heaters for electrical heating and resistance heating are light weight, low heat storage and energy saving. See the comparison between a stainless steel wire annealing furnace using a Moldatherm heater and a brick body furnace made by our competitors.

Introducing Moldatherm(LGO)...
1.Heating-up time is one fifth bricks furnaces.
2.External wall temperature is reduced with high heat insulating.
3.Electric energy is 30% reduced with little heat loss.
Tissue characterization (Background information)
Item Specifications
R: regular-type RLS: high-temperature
quality of material Al2O3-SiO2
quality of material Fe-Cr-Al
Max. operation Temperature 1100°C 1200°C
Coefficient of thermal conductivity 0.20w/m·K (In the atmosphere · at 1000°C)
0.17w/m·K (In the atmosphere · at 800°C)
0.15w/m·K (In the atmosphere · at 600°C)
Specific heat 1130J/kg·K
Degree of density 210kg/m3 230kg/m3
Contraction percentage 0~2.5%