Products
HOME > Products > Laboratory Electric Furnace & Oven > Oven series Compact-type Inert Gas Oven KLO-30NH

Compact-type Inert Gas Oven KLO-30NH

Compact N2 atmosphere oven optimal for researches and development Debinding, defatting, annealing and other heat treatments at lower than 300 ppm of O2 concentrations
Compact-type Inert Gas Oven KLO-30NH

Maximum temperature
600°C

Feature

  • A high-temperature oven running at a maximum of 600°C
  • Uniform furnace internal temperature by the use of a forced circulation system
  • Reduction of area by 47%, and volume by 37% compared with our INH-9CD
  • 300 ppm or lower residual O2 concentrations
  • Temperature falling time reduction by a cooling blower
Applications N2Research and Development
Option Temperature Recorder, Shelves (with shelf plates), Oxygen Meter

The inert gas oven is compact but performs heat treatments at up to 600°C of working temperatures. The forced hot-air circulation system achieves uniform furnace internal temperature environment. 300 ppm of residual O2 concentration in a N2 atmosphere is assured. You can use the oven by connecting the power supply and nitrogen only. Cooling water is not needed. Programmable operations are available. The timings of gas introduction and cooling blower starting can also be programmed.

Inquiry about products
  • In addition to standard models, special specifications are available.
    If you are interested, access here.
Production type oven enabling various gas introduction
KLO-30NH
Method Convection
Max. operation Temperature(*1) 600°C
Normal operation Temperature(*1) RT+40~600°C
Temperature distribution (Reference)(*2) ±8°C(at 600°C)
Heat up time (Reference)(*1) Within 60 minutes (RT+40~600°C)
Control System Programmed controller
Cooling mechanism Lateral cistem (Supply port: Φ50)
Door seal (Supply port: Φ30)
Shelf plate withstand
(Uniformly-distributed load)
5kg/1 sheet
Chamber pressure meter 0~2kPa
Outer dimension (mm) 610(W)×1300(H)×725(D)
Inside dimension (mm) 300(W)×300(H)×300(D)
Thermocouple K
Exhaust port 1B · ball value
Equipment weight a0pprox. 200kg
Breaker capacity AC200V 40A 1ø50/60Hz
Safety feature Thermocouple disconnection
Over-heat Protection,
Earth Leakage Breaker
Motor over-load protection
Standard accessory 2 shelves (with shelf plates),
Supply cable (4m)
(*1) Temperature at the control point within the heating chamber.
(*2) Valid dimension is two-thirds inside dimension.
☆ Thermocouples are consumable items.
Specifications
  • For product improvement the specifications, exterior appearance and other conditions may be modified without notice.
Inquiry about products
  • In addition to standard models, special specifications are available.
    If you are interested, access here.