Products

Search by application

Automobile/Airplane

Heat Treatment Industrial Equipment

Continuous Carburizing Furnace (Tray Pusher Type, Roller Hearth Type) Continuous Carburizing Furnace (Tray Pusher Type, Roller Hearth Type) The furnace inside optimizing structure achieves superior temperature distributing performance. You can choose RFQ(R) (shaking relative flow quenching). Reducing the surface area and by using high-performance thermal insulating materials, the system saves energy.
Mesh Belt Type Continuous Carburizing Furnace Mesh Belt Type Continuous Carburizing Furnace The continuous carburizing furnaces using mesh belts for the conveyors.
Rotary Drum Type Continuous Carburizing Furnace Rotary Drum Type Continuous Carburizing Furnace Spiral rotary drum conveyors are used for the continuous carburizing furnaces. Efficient heating using gas and electric power is optimal for continuous processing of small parts such as bolt, chain plate and others.
Non-frame Carburizing Furnace / Non-frame Soft Nitriding Furnace Non-frame Carburizing Furnace / Non-frame Soft Nitriding Furnace The carburizing furnace uses no flame curtain and uses a vacuum purge type oil tank. These safety at the heat treatment site is improved and the operation environment pollution by soot and heat is reduced.
KCF Carburizing Furnace / KNF Gas Soft Nitriding Furnace KCF Carburizing Furnace / KNF Gas Soft Nitriding Furnace The carburizing and gas soft nitriding furnaces are the best- and long-selling model. You can choose regenerative burners and quenching using a vertically shaking oil tank.
Straight-Through Carburizing Furnace Straight-Through Carburizing Furnace The straight-through production line flows trays in a single direction, while securing the best-selling KCF carburizing furnace performance.
Koyo Vacuum Carburizing Furnace Koyo Vacuum Carburizing Furnace Cyclohexane is used for the vacuum carburizing gas, cost cutting and safety.
Continuous Annealing Furnace / Normalizing Furnace Continuous Annealing Furnace / Normalizing Furnace The front and rear vacuum purge chambers enable high-quality annealing using a small volume of nitrogen (N2) gas. The low-cost high-productivity normalizing furnace continuously performs heat treatment.
Nitriding Furnace Nitriding Furnace 2-stage nitriding using our unique decomposed ammonia gas produces high-accuracy, high-quality nitrided products.
Mesh Belt Type Brazing Furnace Mesh Belt Type Brazing Furnace The brazing furnace uses a mesh belt for the conveyor. Nitrogen (N2) base gas, endothermic gas and exothermic gas atmospheric processing are available.
Mesh Belt Type Sintering Furnace Mesh Belt Type Sintering Furnace The continuous sintering furnace uses a mesh belt for the conveyor. High-quality sintering is performed using accumulated burn-off technologies and temperature control.
Endothermic Gas Generator Endothermic Gas Generator An energy saving heater is used for cost cutting and downsizing. Thanks to the stable gas constituents and wide turndown width, the endothermic gas generator can flexibly supply gas.
Ammonia Cracker Ammonia Cracker The compact cracked ammonia gas generator uses a Moldatherm heater for downsizing. The generator is active in stainless steel bright annealing, nitriding and other thermal processing.
Exothermic Gas Generator Exothermic Gas Generator The exothermic gas generator produces rich and lean exothermic gases from hydrocarbon based gases. The equipment is suitable for low-carbon steel annealing and brazing.
Tempering Furnace Tempering Furnace Continuous processing and batch processing are available.
Bottom Up Furnace Bottom Up Furnace The space-saving furnace is usable for high-temperature heat treatment in a vacuum purged or inert gas atmosphere. The furnace is optimal for ceramic firing and other thermal processing.
Washing Matchine Washing Matchine The washing machine using a petroleum solvent is used before and after heat treatment. The machine is structured to use no pit to save space and equipped with a high-performance distillation and regeneration unit as a standard component for low running costs.

Semiconductor

Mass-Production Model Flexible Vertical Furnace VF-5100 Mass-Production Model Flexible Vertical Furnace VF-5100 The large-batch, diffusion, LPCVD, vertical furnace performs 4- to 8-inch wafer ultra high-temperature treatment. The system can be flexibly configured to meet your production line to process a variety of products. The furnace is best for power device manufacture.
Low-Cost Mini Batch Vertical Furnace VF-3000 Low-Cost Mini Batch Vertical Furnace VF-3000 The low-price vertical furnace equipped with an auto conveyor can be used for the range from R&D to mass-production of 4- to 8-inch wafers. We have achieved such a low price that after-process users can introduce the furnace. Ultra high-temperature treatment is available and best suited for power device manufacture.
Vertical Furnace for a small of production and R&D VF-1000 Vertical Furnace for a small of production and R&D VF-1000 The small production type vertical furnace for experiments and researches (R&D) achieves high-quality processing. The furnace is compact and requires only a small installation area but usable for a wide range of wafer diameter and exhibits the same temperature characteristics as those of mass-production furnaces.

Conveyor Furnace for Electronics Industry

Standard Muffle Furnace Standard Muffle Furnace Mesh-belt type continuous furnace using a muffle with excellent in-furnace atmosphere stability and reproducibility. Suitable for brazing, soldering, thick film baking, electrode drying, and de-binding.
Hydrogen Furnace Hydrogen Furnace Mesh-belt type continuous furnaces to be used for treatment in reducing atmosphere, such as metal brazing and glass sealing. Easy to handle because of the H2 atmosphere mechanism with consideration given to safety.
Multi-Inlet/Exhaust Furnace for Nitrogen Atomosphers Multi-Inlet/Exhaust Furnace for Nitrogen Atomosphers Mesh-belt type continuous furnace enabling high precision N2 atmosphere separation using the latest gas control technology. Suitable for LTCC substrate and MLCC manufacturing, de-binding, and powder metallurgy baking.
Muffle-less Furnace Muffle-less Furnace Muffle-less furnace (atmosphere furnace) with suppressed heat dissipation and enhanced energy-saving effect. Suitable for LTCC substrate and inductor manufacturing, thick film baking, and glass sealing.
Ceramic Conveyor Type Continuous Furnace Ceramic Conveyor Type Continuous Furnace Special ceramic chains, excellent in heat resistance and abrasion resistance, are used as a transfer conveyor. Muffle-less, Ceramic semi-muffle, and Metal muffle types are selectable.
Compact Conveyor Furnace 810A Compact Conveyor Furnace 810A Small size with a reduced installation area, and capable of heat treatment in various atmospheres. Small conveyor furnace suitable for thick film baking, electrode drying, and ceramic substrate manufacturing experimentation.
In-line Type Vacuum Reflow Soldering Furnace In-line Type Vacuum Reflow Soldering Furnace Rapid and uniform heating is actualized by Halogen lamps. Nitrogen Atomosphers.
Clean Oven (Order Products) Clean Oven (Order Products) Continuous ovens originally manufactured using technologies for FPD manufacturing and clean oven for experimentation. For electronic parts, disks, glass epoxy substrates, film drying, curing, and annealing.

Laboratory Electric Furnace & Oven

Box Furnace KBF 1150 deg C Series Box Furnace KBF 1150 deg C Series Desktop electrical furnaces (box furnaces) for experiments and laboratory researches. Standard type for 1150 deg C heat treatments using Moldatherm LGO heaters for high-speed temperature rising and falling and energy saving.
Box Furnace KBF 1250 deg C Series Box Furnace KBF 1250 deg C Series High-speed temperature raising and falling and energy saving by Moldatherm LGO heaters The best processing using muffles is available.
Box Furnace KBF 1500 deg C Series Box Furnace KBF 1500 deg C Series These electrical furnaces (box furnaces) are desktop types but can perform heat treatments at 1500 deg C by using SiC heaters. The use of SiC heaters achieves high-speed temperature increase and energy saving. Auto mode experiments are available using programmers.
Box Furnace KBF 1700 deg C Series Box Furnace KBF 1700 deg C Series The high-temperature electrical furnaces (box furnaces) that are desktop type but can be used for as high as 1700 deg C heat treatments. Long-life molybdenum disilicide heaters are used, for easy replacement. The programmer is a 19-pattern, high-performance type.
Box Furnace KBF 1800 deg C Series Box Furnace KBF 1800 deg C Series The high-temperature electrical furnaces (box furnaces) that are desktop type but can be used for as high as 1800 deg C heat treatments. Long-life molybdenum disilicide heaters are used, for easy replacement. The programmer is a 19-pattern, high-performance type.
Muffle Equipped Box Furnace KBF 1250 deg C-S Muffle Equipped Box Furnace KBF 1250 deg C-S Experiment and laboratory research use desktop electrical furnaces (box furnaces) developed by installing metallic muffles in the KBF 1250 deg C series furnaces so that heat treatments at 1000 deg C can be carried out within airtight vessels.
Tube Furnace KTF 1100 deg C Series (1 Zone Control) Tube Furnace KTF 1100 deg C Series (1 Zone Control) Electrical furnaces (tube furnaces) for experiments and laboratory researches Horizontal, desktop, energy-saving furnaces can perform heat treatments in atmospheres using furnace tubes.
Tube Furnace KTF 1100 deg C Series (3 Zone Control) Tube Furnace KTF 1100 deg C Series (3 Zone Control) 3-zone controlling high-accuracy electrical furnaces for experiments and laboratory researches
Tube Furnace KTF 1200 deg C Series (3 Zone Control) Tube Furnace KTF 1200 deg C Series (3 Zone Control) 3-zone controlling, high-accuracy type electrical furnaces (tube furnaces) for experiments and laboratory researches Higher-grade type equipped with overheating preventing meters in all zones and half-divided type Moldatherm heaters.
Tube Furnace KTF 1500 deg C Series (1 Zone Control) Tube Furnace KTF 1500 deg C Series (1 Zone Control) Electrical furnaces (tube furnaces) using SiC heaters for experiments and laboratory researches Horizontal, desktop, energy-saving type Furnace tubes can be additionally installed for heat treatments in atmospheres.
Tube Furnace KTF 1700 deg C Series (1 Zone Control) Tube Furnace KTF 1700 deg C Series (1 Zone Control) Electrical furnaces using MoSiO2 heaters for experiments and laboratory researches
Vacuum Purge Type Small Box Furnace uBF Vacuum Purge Type Small Box Furnace uBF Based on the KBC series which has a good delivery record, the vacuum purge structure reduces the purging time. The multi-purpose electrical box furnaces perform heat treatments in a N2 atmosphere or H2 (reducing) atmosphere.
Compact Continuous Furnace 810A Compact Continuous Furnace 810A The compact furnaces require only small installation areas and perform heat treatments in a H2 (reducing) atmosphere. The compact conveyor furnaces are optimal for thick film firing, electrode drying and ceramic board manufacture experiments.
Vacuum Bake Furnace Vacuum Bake Furnace The electrical box furnace developed for heat treatments in a vacuum environment. The furnace performs baking, drying, degreasing, hardening, annealing and various other treatments in short cycle time.
High-Tempe Atmosphere Box Furnace High-Tempe Atmosphere Box Furnace Introduction of high-temperature atmosphere box furnaces that can perform high-temperature processing (firing, sintering and annealing) in N2, H2, vacuum and various other atmospheres.
Vacuum Purge Type Small Box Furnace KBF848N-V Vacuum Purge Type Small Box Furnace KBF848N-V The compact, desktop, electrical box furnace for experiments. High-temperature heat treatment in a vacuum or N2 atmosphere is possible.
Vacuum Purge Typel Box Furnace MB series Vacuum Purge Typel Box Furnace MB series The KBF1150 deg C type compact electrical furnace was refined and remodeled to this floor type box furnaces. N2 atmosphere replacing time is reduced by vacuum purge. The heat treatment furnaces are suitable for LTCC and MLCC manufacture.
Atomosphere Oven KLO Series Atomosphere Oven KLO Series Compact, desktop and simple but easy-to-use hot air circulation type ovens for experiments and laboratory researches usable for drying, curing, annealing and tempering.
High-Temperature Oven HTO Series High-Temperature Oven HTO Series Side-flow hot-air circulation type ovens for high-temperature heat treatments at up to 500 deg C A program control function is built in, and the ovens can be used for drying, curing, annealing, tempering and other small production also.
Ultra High-Temperature Oven UTO Series Ultra High-Temperature Oven UTO Series Hot-air circulation type ultra high-temperature ovens for heat treatments at up to as high as 700 deg C Usable for a wide range of thermal processing from firing, incineration and other high-temperature heat treatments to drying and other low-temperature heat treatments.
Inert Gas Oven INL Series Inert Gas Oven INL Series Hot-air circulation type ovens performing heat treatments in the environments using N2 atmospheres at 20 ppm or lower O2 concentrations. They achieve ceramic part debinding (defatting), annealing and other effective heat treatments.
Inert Gas Oven INH Series Inert Gas Oven INH Series The ovens perform heat treatments at up to as high as 600 des C in a N2 atmosphere, achieving 20 ppm of low O2 concentration. The ovens are the type for production and have been used for abundant ceramic part defatting and various other non-oxidation heat treatments.
Compact-type Inert Gas Oven KLO-30NH Compact-type Inert Gas Oven KLO-30NH Compact N2 atmosphere oven optimal for researches and development Debinding, defatting, annealing and other heat treatments at lower than 300 ppm of O2 concentrations
Clean Oven CLO Series Clean Oven CLO Series Class 100 air cleanliness is achieved by higher airtightness enabled by entirely sealing the inner chamber. Heat treatments in a N2 atmosphere are also available. The hot-air circulation system improves curing and annealing yields.
High-Temperature Clean Oven CLH Series High-Temperature Clean Oven CLH Series High-temperature baking in a clean environment enabled by the heat resistant high-performance filter and unique cooling unit. A hot-air circulation system is used to highly accurately carry out wafer and glass substrate baking/aging, polyimide curing and annealing.
Exhaust Gas Burn-out System GM Series Exhaust Gas Burn-out System GM Series Organic matters in the exhaust gas from ceramics temporary sintering and electronic part defatting are completely burnt. Exhaust gas thermal cracking is available at a maximum of 850 deg C.